Large Venue 9800 ANSI Lumens DLP Laser Projector Ultra HD
Resolution
Large Venue Projector 9800 ANSI Lumens DLP Laser Ultra HD
Resolution Projector SNP-LU9000
Features:
Ultra HD resolution
No rainbow effect
Two-channel digital signal display
Alien 3D display
New laser light source, environmental protection and eye protection
Efficient dustproof technology
Smart switch
Twin turbo cooling system
Standard interface configuration
3D connection
3D high frame rate refresh
HDBaseT
Vertical Horizontal Keystone Correction
way to control
20,000 hours*1 Long-life laser light source
This series of laser light source engineering machines has a
brightness of up to 7200lm ~ 8200lm, and a light source life of up
to 20,000 hours (standard mode) ↑. The light source components are
sealed to prevent dust from entering the optical core components
such as fluorescent wheels and lenses that may affect the use
effect and service life, effectively reducing maintenance costs and
ensuring long-term continuous operation. It is more suitable for
the engineering market that needs to be used for a long time!
Whether it is an exhibition display or an electronic billboard, it
can be more calm.
Stepless energy saving mode
On the basis of the light source life of up to 20,000 hours
(standard mode)*1, the traditional fixed energy-saving mode design
is abandoned. According to the characteristics of the new E-laser
light source, the energy-saving effect and noise are improved, and
the stepless energy-saving mode is innovatively developed, which is
more applicable In the changeable engineering application
scenarios!
Taking into account the requirements of brightness and service
life, it provides users with 4 selectable modes, which can be
realized by selecting and applying the appropriate mode through the
menu.
Light output | light output efficiency | Light source life (h) |
standard mode | 100% | 20000 |
Energy saving mode 1 | 70% | 30000 |
Energy saving mode 1 | 50% | 50000 |
silent mode | 50% | 20000 |
In the above-mentioned standard mode, users can freely adjust
according to their own needs (unit accuracy can reach 1%), which
can meet the normal needs of the display brightness and achieve the
effect of energy saving.
*1 This time is the life time of the light source, not the warranty
time.
*2 The time is the life time of the light source after the long
life 2 mode is always turned on, not the warranty time.
*3 The service life will vary greatly depending on environmental
conditions, usage habits and other factors. And this time is the
life time of the light source, not the warranty time.
HDR high quality
Two additional image adjustment modes for HDR high quality are
added. And by activating the dynamic use range of expanding the
brightness, the presented projection picture is more realistic.
image processing technology
The RESOLUTION ENHANCER (image quality enhancement) technology,
which is specially improved for the characteristics of the laser
light source, enhances the realism of the image by enhancing the
"fineness", "shading" and "vividness" suitable for the color
characteristics of the laser light source. At the same time, SUPER
CONTRAST The adjustment function has been improved by "high color
rendering", which can more deeply correct the influence of indoor
lighting or external light sources on the picture, thereby
improving the picture contrast effect and optimizing the visual
experience. Even in a bright environment, it can be displayed
clearly image.
Stitching fusion and surface imaging functions
Using multiple projectors, through the splicing function, seamless
splicing of large images can be achieved. At the same time, due to
the geometric correction function, it can image on curved objects
such as cylinders and spheres. Using the curved surface correction
function, the distortion of the image can be supplemented and
adjusted, and the curved surface projection also has the creativity
of splendid Seiko. On this basis, by using the camera (or camera),
the automatic geometric correction of stacking stitching fusion,
special shape and brightness color is performed.
※ Equipment other than projectors required for automatic geometric
correction needs to be prepared separately
Geometric Correction (Deformation)
Shaped projections on spherical, curved and corners are made
possible by geometric correction using a dedicated door application
on a PC.
high performance transmission
The whole series is equipped with HD BaseT interface and 2-way HDMI
input (HDMI1/ HDMI2), 1-way HDMI output, 3GSDI (only supported by
SNP-DU8200) interface, which can support 1080p high-definition
transmission under long distance, FulHD, 4K signal compatible
output.
※Up to 4 projectors can be cascaded output through HDMI OUT port,
and the number of cascades depends on signal equipment, cables, etc
Air pressure sensor monitoring function
In addition to the commonly used sensors for temperature,
illumination, gravity, etc., this projector also has a built-in air
pressure sensor monitoring system, which controls the projector's
fan speed according to the detection results of air pressure at
different altitudes to ensure stable operation of the projector, so
that the projector can adapt to "The Plateau Effect"
360° omnidirectional projection
The installation method is flexible and can be installed at any
angle.
Auto power on*4
When the projector is in standby mode and detects a video signal
input from an external device, this function activates the
projector to automatically display the image on the screen.
*4 This function only supports COMPUTER IN1, HDMI2, VIDEO port
input. This function is not available when Standby Mode is set to
Network Standby (WOL) or Power Save. This feature may be
inadvertently enabled through a connected external device. So do
not put things on or around the projector.
Motorized lenses, lens shift and lens memory
When the projector is in standby mode and detects a video signal
input from an external device, this function activates the
projector to automatically display the image on the screen.
※When using ML-713CN.
4K signal input
The HDMI, HDBaseT and DisplayPort ports of this series of
projectors recognize 4K signal input. It provides more diverse
choices for engineering installation and brings a higher-end visual
enjoyment.
4K Brown Mode: Hai mode supports 4K 50Hz/60Hz 420 format and
24Hz/25Hz/30Hz444, 4:2:2 format.
4K conversion mode: Hai mode supports 4K 50Hz/60Hz44, 42:2, 4:2:0
formats and 24Hz25Hz/30Hz, 4:4, 4:2:2 formats.
Projection Technology | DLP |
Display Equipment | Chip Specification | DMD, 0.67' |
Resolution | Pixel | 1920×1200 |
Brightness | 11000 ANSI Lumen |
Light source | RgB Dual Color Laser (red & blue) |
Light Lifespan | 20,000hrs |
Contrast Ratio | 120,000:1 |
Aspect Ratio | 16:10 |
Mounting | Ceiling / Desktop / Front / Rear |
Lens Type | Motorized Shift / Motorized Zoom / Motorized Focus |
Lens Shift | Horizontal | +/- 15% |
Vertical | +/- 50% |
Lens | Standard Lens A06 | Throw Ratio 1.22~1.53 |
Optional Lens A15 | Throw Ratio 0.75~0.95 |
Optional Lens A01 | Throw Ratio 0.95~1.22 |
Optional Lens A03 | Throw Ratio 1.52~2.92 |
Optional Lens A13 | Throw Ratio 2.90~5.50 |
Fixed Lens A16 | Throw Ratio 0.36 |
Noise | Standard @25℃ | Full Mode: 38db / Eco Mode: 36db |
Power Consumption | Standard mode: 1050W, Stand-by mode: <0.5W |
Dimensions (WxDxH) | 484mm x 519mm x 181mm / 19in x 20.4in x 7.1in |
Weight | 23.5kg / 51.8lb |
Input | PC / Video | HDMI 1.4 HDCP Support x1 |
DVI-D x1 |
D-Sub 15pin x1 |
HDBaseT x1 |
3G-SDI x1 |
3D-Sync x1 |
Output | PC / Video | D-Sub 15pin x1 |
HDMI 1.4 HDCP Support x1 |
3D-Sync x 1 |
Control Port | IR | IR Remote |
Wired Remote Control | Wired in x1 |
LAN | RJ-45 x1 |
WAN | USB type A x1 |
RS-232 | RS-232 (D-sub 9 pin) x1 |
System Upgrade | Mini USB (for LAN Firmware upgrade only) (D-sub 9pin) x1 |
